Lynx 10-inch Monitor Video Door Entry System

System includes

• 1 x LYNX 10-inch video monitor

• 1 x Surface Mount Doorbell

• 1 x Power supply

10 inch Digital monitor

• Monitor finish: steel with acrylic glass • Dimensions: W334 x H210 x D25mm • Mounting way: surface mount • Resolution: 420TVL • 12 ringtones • Video Channels = 4 • "do not disturb" function- monitor ring mute • Check outside and talk to people outside at any time you wish to, even if no one rings the bell • Intercom function: to all rooms at once

Surface mount zinc alloy Doorbell camera unit

• Finish: zinc alloy anthracite colour • Dimensions: W98 x H173 x D25mm • Mounting type: Surface mount • Resolution: 270,000 pixel • Viewing angle: 68-degree field of view • Connect directly to an electric lock • Night vision

• DC power transformer • Power Voltage: Input 100-240V-1.8A • Output 13.8V-3.5A

Connect up to 3 x CCTV cameras to a single kit. Or buy two single kits and connect together into 2-Way system with 2 x doorbells and 2 x video monitors plus 2 x CCTV cameras

• Standalone Proximity Reader - provides keyless entry to house. Open lock by holding key fob or card in front of the reader. Requires 12V power supply

• Standalone Keypad - with this device you can have keyless entry to your house. Up to 250 people can have their own pin code. Requires 12V power supply

• Door Strikes and Bolt Locks - electric locks which you can open via your monitor. Requires 12V power supply

• Exit Buttons - You will need one of these inside your property if you have an electric lock

• Proximity Key Fobs and Proximity Cards - you will only need these if you add Proximity Reader

Recommended cable: 4-wire shielded alarm cable

• For distances up to 30 metres: • The best quality video with 4-wire alarm cable 1.0mm • Minimum requirements cable 4-wire 0.2mm

• An additional RG59 coax cable will be needed for distances between 30 and 200 metres