2-Easy WiFi IP Keyfob Reader 2-Monitor Door Entry Kit

Model DT607 Proximity Reader Surface Mount

• Finish: Stainless Steel • Dimensions: H176 x W90 x D24mm • Mounting type: surface mount • Proximity Reader built-in. Comes with 5 x keyfobs • Camera: new generation HD image sensor 650 TV lines, wide angle 170-degree fisheye • Night vision with advanced Auto Sensor LED • 'Talk' and 'Unlock' Indicators • Pan & Tilt function • PIR connection port for motion detection function (optional) • Electric lock connection port

 

WiFi/IP 7-inch Image Recording. Recieve video call to your smart phone. Full Duplex (2-way talking). Handsfree. Colour video

• Finish: White with light grey frame • Dimensions: W174 x H160 x D22mm • Mounting type: surface mount or desk mount with additional mounting available to purchase • Resolution: 800 x 480 pixels • 22 ringtones • Image Recording:records 100 pictures on internal memory. 10 sec video clips if SD card max 32GB is installed • Pan,Tilt and Zoom functions • Night Ring function • Clock and calendar • 'Do Not Disturb' function • Check outside and talk to people outside at any time you wish to, even if no one rings the bell • Inner Call Intercom function: to all rooms at once between multiple monitors installed • Divert calls to your smart phone or tablet via WIFI or IP. Apps are available

DT471 Slave 7-inch Touch screen. Full Duplex (2-way talking). Handsfree. Colour video

• Finish: White with light grey frame • Dimensions: W174 x H160 x D22mm • Mounting type: surface mount or desk mount with additional mounting available to purchase • Resolution: 800 x 480 pixels • 12 ringtones • Pan,Tilt and Zoom functions • Night Ring function • Clock and calendar • 'Do Not Disturb' function • Check outside and talk to people outside at any time you wish to, even if no one rings the bell • Intercom function among all monitors in one flat/apartment

 

PC7 Combo Intelligent power supply

• One per system is required • Multi protection: short circuit, overload, over voltage • Input Voltage: 100~240V • Rated Output Voltage: DC 28V+/-2V • Rated Output Current: 1.5A

 

System intended for daisy chain connection. See here: Connection Diagram

Connection via "star" requires an additional hub: DBC-4 distributor

 

This system transmits video and audio through the power cable. No Polarity connection

• Recommended cables Unscreened: twisted pair, flex multi-cores, speaker cable, CAT5/CAT6

• Minimum requirements 0.5mm cable up to 2mm (depends on distance)

• Working distances up to 150 metres between doorbell camera and power supply and another 150m between power supply and monitors

 

For iPhone IOS search Apple store for VDP Connect and install it.

For Android Samsung: VDPConnect

 

DX471 WIFI Monitor Manual

DT471 Monitor Manual

Doorbell Model 607 Manual

PC7 Power Supply Manual